In the past, we had discussed several posts on two transmit two receive MIMO communication, where the transmission was based on V-BLAST. The details about V-BLAST can be read from the landmark paper V-BLAST: An architeture for realizing very high data rates over the rich scattering wireless channel – P. W. Wolniansky, G. J. Foschini, G. D. Golden, R. A. Valenzuela. We will assume that the channel is a flat fading Rayleigh multipath channel and the modulation is BPSK.
Tag: SIC
MIMO with MMSE SIC and optimal ordering
This post attempts to build further on the MIMO equalization schemes which we have discussed –
(a) Minimum Mean Square Error (MMSE) equalization,
(b) Zero Forcing equalization with Successive Interference Cancellation (ZF-SIC) and
(c) ZF-SIC with optimal ordering.
We have learned that successive interference cancellation with optimal ordering improves the performance with Zero Forcing equalization. In this post, we extend the concept of successive interference cancellation to the MMSE equalization and simulate the performance. We will assume that the channel is a flat fading Rayleigh multipath channel and the modulation is BPSK.
MIMO with ZF SIC and optimal ordering
In previous posts, we had discussed equalization of a 2×2 MIMO channel with Zero Forcing (ZF) equalization and later, Zero Forcing equalization with successive interference cancellation (ZF-SIC). In this post, we will explore a variant of ZF-SIC called Zero Forcing Successive Interference Cancellation with optimal ordering. We will assume that the channel is a flat fading Rayleigh multipath channel and the modulation is BPSK.
MIMO with Zero Forcing Successive Interference Cancellation equalizer
The post on MIMO with Zero Forcing equalizer discussed a probable way of equalizing a 2×2 MIMO channel. The simulated results with the 2×2 MIMO system with zero forcing equalizer showed matching results as obtained in for a 1×1 system for BPSK modulation in Rayleigh channel. In this post, we will try to improve the bit error rate performance by trying out Successive Interference Cancellation (SIC). We will assume that the channel is a flat fading Rayleigh multipath channel and the modulation is BPSK.
Continue reading “MIMO with Zero Forcing Successive Interference Cancellation equalizer”